206B Slow Hardener/Resin Gallon KIT

This kit also includes 1 pump set

105B Resin Features are:

• The resin is a clear, pale yellow, low-viscosity liquid epoxy resin.
• Formulated for use with West System hardeners
• Can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance.
• Formulated without volatile solvents and does not shrink after curing.
• It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins.
• Resin viscosity is approximately 1000 centipoise (cp) at 72 F (22C)
• 105 Resin is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals when mixed at the proper ratio with a West System hardener.
• An excellent adhesive
• Can be used to bridge gaps and fill voids when modified with West System fillers and can be sanded and shaped when cured.
• With roller applications, it has excellent thin-film characteristics to flow out and self-level without “fisheyeing.”
• 105 Resin/207 Hardener mixtures cure clear so you can achieve a natural finish when coating with varnish.

• 10lbs/4.5kg
• 126.6 fl oz/3.74L

206B Features are:  

• Excellent for extended working at higher temperatures
• Pot life at 72°F (22°C): 20 to 25 minutes
• Cure to a solid state: 10 to 15 hours
• Cure to maximum strength: 1 to 4 days
• Minimum recommended temperature: 60°F (16°C)

• 2lb /.9kg
• 27.5 fl oz/814ml

This is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating.

*Epoxy cures faster in warmer temperatures with thicker applications and slower in cooler temperatures with thinner applications. 

Click here for The West System Technical Data (pdf)

Click here for hardener selection guide